For SSD which is best? IDE or AHCI - Windows 7 Help Forums
Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. Drivers Our Sites Site Links About Us Find Us Vista Forums Eight Forums Ten Forums PC Help Forum Network Status Contact Us Legal Privacy and cookies Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation
How do there drivers differ? What's special about Text Mode Drivers? They are loaded into memory before Windows Kernel, so there are no USB drivers loaded yet at that stage, no CD-ROM drivers, no bus drivers, nothing at all. Ignore this screen by choosing "Next" one more time: 7) In "Task Selection" screen, select "Drivers" and "Bootable ISO" by pressing corresponding buttons
Is there a way to enable AHCI mode after Windows 7 installation, read somewhere AHCI is more faster than IDE, when i change IDE to AHCI in Bios , Windows 7 wont boot is there any Registry method....... The 11.0.x is somewhat stable (seemingly) but are several months older than the 10.8's, which seem to work better anyway (they're the proper Intel released ones)
Convert AHCI mode to RAID mode without re-installing
How different is this from the RAID function set up with Ctr-I? Is it better or worse in terms of fault tolerance and performance? Many thanks for any advice. However, is it possible to convert my present AHCI system to a RAID system without re-installing windows? I heard that some registry settings will do the trick
Close (updated values are saved as soon as you hit OK), type Exit and press Enter at the command line, shut down, boot up and enjoy Windows 8 with AHCI. Thanks for any info James colin worked fine, thank you Jason Just to potentially help out any others: Previously had Blu-Ray + HDD on Win 8.1 in IDE mode
Did I fuck up the above because I switch to AHCI after win 7 install? If so, why 6 days later, shouldn't be instant? The other suspect on the newly install PC are: Intel Control Center Intel Management Engine components Intel SDK for OPen CL -- CPU Only Runtime Package if it's not because of me switching from IDE to AHCI, what else could cause this? The entire PC is brand new. In the case of AHCI you boot Windows in IDE mode and there's a registry edit to enable msahci driver then you reboot and switch to AHCI and it should work
How to Install AHCI Drivers in Windows 7 after Setup
Install AHCI Drivers in Windows 7Note on the Other AHCI Driver Install Guides Available Online: I'm not saying that the other guides won't help you or won't work. Intel 13245GM), simply Google "Intel 12345GM AHCI driver download" and one of the Top 3 results should be the page where you can download the driver.advice: make sure you download from manufacturer sites (ex: intel.com), not potential fraud like.
In fact, data loss will not occur, I don;t know why they post this warning ( try at your OWN risk though xD ) Type yes to continue (twice i my case as I have two disks ) and the server should boot fine. Once it is installed, I disabled the second controller (in AHCI mode you need only one driver, in ATA mode, you seem to get two ) It prompted me to reboot
Switch to AHCI in Windows 7 (after install)
Create new user account in Windows 7 How to enable DHCP in Windows 7, 8 or 10? (2015 Update) Recent Commentsvivek - thanks for this practical tip..found the file and replaced!Oliver Krautscheid - Sure Andrew. Aside from that, he loves to fully customize systems with Rainmeter and Dreamscene, find out more about ancient civilizations like the Chachapoya, sharpen his digital photography skills and create software with a small group of selected developers
How To Change Disk Controller Mode From IDE to AHCI Without Reinstalling Windows XP
from the context menu: Choose not to use Windows Update this time: Choose to install driver from specific location: Choose not to use search: Press Have Disk... Verify everything is OK, allow second reboot if necessary Make sure that Windows loaded normally: New detected hardware balloons may appear in the tray area after the first reboot after driver update
Change IDE to AHCI in BIOS - Much better performance - Windows 7 Help Forums
I moved windows 7 over to the new SSD and re-aligned the partition properly The drive setup is as follows: 2x 500GB WD Black drives in RAID 0 1x 120GB ADATA S510 SSD In BIOS, RAID mode is enabled. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build
HOWTO: enable AHCI mode after installing Windows
The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Hope someone finds this useful - I wanted to do this as I needed AHCI mode to dual boot Linux and I didn't have a floppy drive on the machine to allow me to install Windows XP in AHCI mode
How to: Change SATA Modes After Windows Installation
Does not RAID stand for Redundant Array of Independent Disks instead of inexpensive? I ask this becasuse 3TB drives can be used in a RAID array and they are NOT inexpensive lol, I think you can say both as time has moved on it is more referred to as independent rather than inexpensive. There are four main factors of a RAID setup: striping, which spreads data across multiple drives, mirroring, which copies the data to more than one disk, space efficiency, which is how much of the total space is available to use, and fault tolerance, which is a measure of how well protected the RAID array is against disk failure
Change from IDE to AHCI after installing Windows 8 - Super User
IDE was a bus too and had speeds, but I think the difference with running in AHCI mode verse UDMA or whatever it emulated was that AHCI had better features, queuing comes to mind
No comments:
Post a Comment